0

Your Cart is Empty

herbal tea
herbs & spices
teaware

November 20, 2026 4 min read

Introduction

Tea bag chemicals extend beyond what grows in the leaf. The bag itself is part of the equation, and that surprises most people the first time they hear it. Consumer awareness of this jumped sharply after a 2019 McGill University study found that steeping a single plastic tea bag at brewing temperature released billions of plastic particles into the water. Hernandez et al., published in Environmental Science & Technology (53(21), 12300-12310), measured approximately 11.6 billion microplastic and 3.1 billion nanoplastic particles released into a single cup from one plastic teabag steeped at 95C.

Torn-open plain tea bag showing fine tea dust beside loose leaf

We source loose-leaf tea for 15+ years, and one reason we never moved into sealed bag formats is exactly this: once you package tea in a sachet, you also choose what that sachet is made from. This post breaks down what typically goes into a commercial tea bag, paper or plastic, and what a reader can actually do about it.

What Tea Bags Are Made Of

Most commercial tea bags contain up to three chemical components beyond the tea itself: a wet-strength resin in paper bags, plastic mesh in pyramid-style bags, and a heat-seal strip that closes the folded edge. None of this appears on the box, and each one changes what ends up steeping into the cup.

Conventional paper tea bags are treated with a wet-strength resin, most often polyamide-epichlorohydrin (PAE), so the paper does not disintegrate after a few minutes in hot water. Epichlorohydrin itself, the reactive building block of that resin, is regulated indirectly: there is no single EU-wide migration limit for paper food-contact resins the way there is for plastics, so national frameworks such as Germany's BfR recommendations serve as the practical reference, and epichlorohydrin is flagged as a substance of concern under REACH at the raw-material stage, before it reacts into the finished resin.

Pyramid-style bags marketed as "silky" or "mesh" are nylon or PET plastic rather than fabric. Above roughly 95C, the temperature most black tea is brewed at, that mesh sheds micro- and nanoplastic particles directly into the water. Most conventional flat paper bags, even ones that look plain, are sealed at the edge with a thin strip of polypropylene, since paper alone will not fuse shut under heat.

None of these materials are unique to cheap brands. They show up across most of the supermarket tea aisle, because they solve a real manufacturing problem: keeping a bag intact through boiling water and a factory sealing line.

Pesticide Residues and Tea Grade Quality

Tea bags are filled with fannings and dust, the smallest leaf particles left over once whole-leaf and broken-leaf grades have been sorted out. Smaller particle size means more surface area exposed to water, which extracts flavour faster, and it extracts anything else present in the leaf faster too, including any pesticide residue that was not properly cleared before harvest.

This is really a sourcing and grading question more than a bag question. Fannings and dust are not inherently unsafe; they are the last, cheapest grade off the sorting line, and they are more likely to end up in mass-market bags because that is where margins are tightest and scrutiny is lowest. The EU applies some of the strictest maximum residue limits (MRLs) in the world for tea, testing for hundreds of individual compounds under Regulation (EC) 396/2005, and lots that fail those thresholds are not supposed to reach EU shelves at all. We buy within EU-certified supply chains and expect every lot to clear that bar before it reaches our warehouse, whether it is destined for a full leaf or a smaller-grade product.

How to Avoid Tea Bag Chemicals

The most reliable fix is switching to loose-leaf tea brewed in a stainless steel or porcelain infuser, which removes the bag material from the equation entirely. If bags are still the preference, look for unbleached paper with no visible plastic seal along the edge, since that is the easiest defect to spot with the naked eye.

Corn-starch based mesh, often sold as "soilon" or PLA, is marketed as plastic-free and compostable, and in a strict material sense it is not petroleum plastic. But most PLA needs industrial composting heat to actually break down, not a home compost bin, so "compostable" on the box is not automatically true for a reader's own kitchen. Look specifically for a named certification, EN 13432 for industrial compostability, or the stricter "OK compost HOME" mark if you want something that will actually break down in a garden bin, rather than the unverified word "biodegradable" on its own, which has no enforced standard.

Day to day, my own default is a gaiwan. It is the one vessel that shows you the truth about a tea without getting in the way of the taste, and it is the piece of kit I would tell anyone serious about switching off bags to get: even a decent thin porcelain gaiwan is not expensive. I do not brew by the clock; I pour on instinct, and with a tea I like I will often take it through 8 to 10 infusions before I am done with the leaves. A stainless infuser basket or a teapot with a built-in strainer works just as well if a gaiwan feels like one more thing to learn: the point is that the leaf touches nothing but water and steel or porcelain.

Conclusion

Loose-leaf tea takes the packaging question off the table entirely. There is no mesh, no resin, no heat-seal strip between the leaf and the water, so the reader controls what actually goes into the cup rather than trusting an unlabelled bag. That is the single point worth remembering from all of this: tea bag chemicals are a packaging problem, not a tea problem, and the fix is choosing what the leaf sits in.

Quality sourcing and transparent grading matter more here than any marketing claim printed on a box. Next time you reach for a box of bagged tea, turn it over and check whether the material is even listed. Most are not, and that gap is worth noticing.

Wouter Gryson

Wouter Gryson is the founder of Valley of Tea. He has imported, tasted and sold single-origin teas, herbs and spices for more than 15 years, working directly with growers around the world.

Leave a comment

Comments will be approved before showing up.


Also in Valley of Tea Blog | Tea Guides, Origins & Brewing Tips

Tall glass of mahogany-red rooibos iced tea with ice
Rooibos Iced Tea: Caffeine-Free Refresher

November 20, 2026 3 min read

Learn to make rooibos iced tea two ways: hot-brewed over ice in 15 minutes, or a smoother overnight cold brew, plus flavour additions and storage tips.

Read More
Neat rows of glass spice jars in a wooden cabinet
Spice Cabinet Organization: A Practical System That Works

November 20, 2026 8 min read

Learn how to organize your spice cabinet with a practical system that keeps every jar findable and fresh. Temperature, layout, and audit tips included.

Read More
Maca powder beside chopped ashwagandha root in two bowls
Maca or Ashwagandha for Your Daily Routine

November 20, 2026 8 min read

Choosing between maca or ashwagandha? Learn how each root tastes, when to use them, and the best ways to prepare each in tea or drinks.

Read More